Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 97)

Rockwell Automation Publication 2080-UM005A-EN-E - December 2013 89
Using microSD Cards Chapter 9
Create datalog ladder program
1. Launch Connected Components Workbench. Create a user program for
your Micro820 controller.
2. Right-click Programs. Select Add New LD: Ladder Diagram. Name the
Program (for example, Prog1).
3. From the Toolbox, double-click Direct Contact to add it to the rung.
4. From the Toolbox, double-click Block to add it to the rung.