Rockwell Automation 2098-IPD-020-DN Ultra5000 Series Intelligent Positioning Drives with DeviceNet Reference Manual - Manual (Page 74)

Publication 2098-RM002A-EN-P – October 2001
4-50 Programming Reference
7 Get Full Parameter
Name
SHORT_ STRING 2 A human readable string representing the
parameter name. For example, “Vel Loop
P-Gain” The maximum number of
characters is 16. (The first byte is a length
code.)
8 Units String Engineering unit string. The maximum
number of characters is 4. (The first byte is
a length code.)
9 Help String The maximum number of characters is 64.
(The first byte is a length code.)
10 Minimum
Value
Data type specified in Descriptor, Data type
and Data Size
1
The minimum valid actual value to which
attribute 1, Parameter Value can be set.
11 Maximum
Value
The maximum valid actual value to which
attribute 1, Parameter Value can be set
12 Default Value The actual value attribute 1, Parameter
Value should be set to when you want the
default for the parameter.
13 Scaling
Multiplier
UINT 2 Multiplier for scaling formula
14 Scaling
Divisor
Divisor for scaling formula
15 Scaling Base Base for scaling formula
16 Scaling Offset Offset for scaling formula
17 Multiplier
Link
Parameter object instance number of
multiplier source.
18 Divisor Link Parameter object instance number of
divisor source.
19 Base Link Parameter object instance number of base
source.
20 Offset Link Parameter object instance number of offset
source.
21 Decimal
Precision
USINT 2 Specifies number of decimal places to use
when displaying the scaled engineering
value. Also used to determine actual
increment value so that incrementing a
value causes a change in scaled
engineering value to this precision.
1 The access rule is defined in Bit Definitions for Instance Attribute 4 on page 4-31:
If bit 4 is 0 the access rule is Set and the Parameter Value can be read and written.
If bit 4 is 1, the access rule is Get and the Parameter Value can only be read.
2 Data type specified in Data Type Definitions on page 4-4.
Parameter Object
Instance Attributes (Continued)
Attr ID
Access
Rule
Stub/
Full
Name Data Type Description