Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED User Manual
Page 16
Advertising
![background image](/manuals/580321/16/background.png)
1-2
Overview
Publication 9303-5.13 – March 1998
To set up your communications system, you need to:
1.
Install DriveTools32 and RSLinx. Refer to instructions later in this chapter.
2.
Determine which configuration most closely matches your system, and
refer to the chapter which represents that configuration for information on
hardware and system configuration.
This communication type:
Chapter
RS-232 Point-to-Point Serial for a SCANport-Compatible Drive
RS-232 Point-to-Point Serial for a 1395 Drive
DH+ Direct
DH+ to RIO Block Transfer Pass Thru
ControlNet Direct
Ethernet to RIO Block Transfer Pass Thru
RSLinx Gateway
Advertising