Testing the configured driver -3 – Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED User Manual
Page 81
Using RSLinx Gateways
8-3
Publication 9303-5.13 – March 1998
3.
Double-click Remote Devices via Linx Gateway. The Remote Devices
via Linx Gateway dialog box appears.
4.
From the Server Name list, select the server to which you want to connect.
A list of Remote drive names appears.
5.
From the Remote driver name list, select the DH+ driver to which you
want to connect.
6.
Click OK.
Testing the Configured Driver
To test the configured driver, you need to:
1.
Close the Configure Drivers dialog box.
2.
From the Communications menu, select SuperWho.
If you have only one configured driver, the communication between the
node(s) on the network should be displayed.
If you have more than one configured driver, double-click on the driver you
just configured to view the communication between the node(s) on the
network.