Setting the communication information, Setting the communication information -5 – Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED User Manual
Page 69
Setting Up a ControlNet Direct Communications System
6-5
Publication 9303-5.13 – March 1998
Setting the
Communication
Information
To provide the DriveTools32 with information that it needs to establish a
connection between your PC and your drive, you need to:
1.
Start DriveManager32.
2.
From the Options menu, select Communication Setup. The
Communication Setup dialog box appears.
3.
In the Communications section, select ControlNet 1.5.
4.
In the Communications Type section, select ControlNet Direct.
5.
In the Enter mapping KTC(X) Port # to use field, enter the KT Port
number.
Important: The KTC(X) Port number must match the RSLinx KT:0 Port
number used for the ControlNet device in the Configure Client Applications
dialog box.
6.
If applicable, select 1336T Two Word Header (use ONLY for 1336T
version 0.10).
7.
Click OK.