Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 45)

Setting Up DH+ Direct Communications Systems 4-3
Publication 9303-5.13 – March 1998
3. Double-click on 1784-KT/KTX(D)/PCMK/PKTX(D). The Configure
Allen-Bradley 1784-KTX/KTXD dialog box appears.
4. In the Value field, select the correct DH+ device for your configuration.
5. In the Property box, change any fields as required to match the settings
needed for your DH+ interface card.
6. Click OK.
Testing the Configured Driver
To test the configured driver, you need to:
1. Close the Configure Drivers dialog box.
2. From the Communications menu, select SuperWho.
If you have only one configured driver, the communication between the
node(s) on the network should be displayed.
If you have more than one configured driver, double-click on the driver you
just configured to view the communication between the node(s) on the
network.
3. Close the SuperWho window when you are finished.