Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 75)

Setting Up an Allen-Bradley Ethernet to RIO Block Transfer Pass Thru Communications System 7-3
Publication 9303-5.13 – March 1998
Configuring
RSLinx for
Ethernet to RIO
Block Transfer
Pass Thru
Communications To use RSLinx for a serial communications system, you need to:
1. Configure the communication driver.
2. Test the configured driver.
Configuring the Communication Driver
To configure the communication driver, you need to:
1. Start the RSLinx application.
2. From the Communications menu, select Configure Drivers. The
Configure Drivers dialog box appears.