Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 82)

8-4 Using RSLinx Gateways
Publication 9303-5.13 – March 1998
3. Close the SuperWho window when you are finished.
Mapping the Configured Driver(s) to the KTPort Value
To map the configured driver(s) to the KTPort value, you need to:
1. From the Communications menu, select Configure Client Applications.
The Configure Client Applications dialog box appears.
2. Choose an unused KT:0 field to which to map your TCP driver.
Important: When you use the Communication Setup option from within any
of the DriveTools32 applications, you need to enter the RSLinx KT:0 number
(i.e., 1 – 8) to which you just mapped the TCP device. Enter the number in the
Enter mapping TCP...Port # to use field in the Communication Setup dialog
box.
3. Use the drop box for the field to map the configured driver to the port.
4. Click OK or Apply.