Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 62)

5-8 Setting Up a DH+ to RIO Block Transfer Pass Thru Communications System
Publication 9303-5.13 – March 1998
6. If applicable, select Use 1395 Protocol.
7. Click OK.
After a short pause, either the DriveManager32 screen with the drive parameters
appears, or you are prompted to create a database.
Using the WHO
Button The WHO button is located on the RIO Pass Through Network Connect to
Drive dialog box to help you determine the DH+ station number for the PLC to
which the drive is connected. When you click WHO, the WHO’s Active dialog
box scans the DH+ network and displays the devices that are currently active.
The following is an example of a WHO’s Active dialog box.
To select a device:
1. Highlight the device.
2. Click OK.
The station number of the device that you selected is used for the Enter
PLC(SLC) DH+ Station (0-77 Octal) field on the RIO Pass Through
Network Connect to Drive dialog box.
When you are using DH+ communications, the WHO’s Active dialog box
quickly completes the scan.