Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 32)

2-4 Setting Up an RS-232 Point-to-Point Serial Communications System for a SCANport Product
Publication 9303-5.13 – March 1998
3. Double-click RS-232 DF1 Devices. The Configure Allen-Bradley DF1
Communications Device dialog box appears.
4. Verify the information is correct.
Important: In the Comm Port field, you must enter the number of the Comm
Port with which you intend to use DriveTools32.
Important: In the Station Number field, you must enter the station number that
matches the GD2 module’s address.
5. Click OK.
Testing the Configured Driver
To test the configured driver, you need to:
1. Close the Configure Drivers dialog box.