Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 52)

4-10 Setting Up DH+ Direct Communications Systems
Publication 9303-5.13 – March 1998
8. If applicable, select 1336T Two Word Head (used ONLY for 1336T
version 0.10).
9. Click OK.
Connecting to the
Drive To connect to the drive, you need to:
1. From the Drive menu, select Connect to Drive. The DH+ Network
Connect to Drive dialog box appears.
2. Enter the DH+ station number. The DH+ station number is the DH+ address
for the drive. Valid station numbers are octal values between 0 and 77.
Important: You can use the WHO button to determine the station number. The
WHO button is covered in further detail below.
3. Click OK.
After a short pause, either the DriveManager32 screen with the drive parameters
appears, or you are prompted to create a database.