Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 85)

Using RSLinx Gateways 8-7
Publication 9303-5.13 – March 1998
Using the WHO
Button The WHO button is located on the Gateway DH+ Network Connect to Drive
dialog box to help you determine the station number for your drive. When you
click WHO, the WHO’s Active dialog box scans the SCANport list and
displays the devices that are currently active. The following is an example of a
WHO’s Active dialog box.
To select a device:
1. Highlight the device.
2. Click OK.
The station number of the device that you selected is used for the Enter DH+
Station (0-77 Octal) field on the Gateway DH+ Connect to Drive dialog box.
The main window displayed in the WHO’s Active dialog box shows the
information read from the network WHO command. The information consists of
the following:
This field: Specifies:
Station # The network station number for each device on the network.
Device Type The type of device that is associated with the network station number.
Station Name The textual description contained in the device at the network station number.
The Bulletin 1395 drive does not support a network station name. Therefore, the
name shown on the network map is the same for all 1395 drives.
Comm. Device The communication device type as it is identified on the network.