Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 19)

Overview 1-5
Publication 9303-5.13 – March 1998
Using DriveTools32 with a 1395 Drive
If you plan to use DriveTools32 with a 1395 drive, you have the following
options:
To use this
communication type: You need this
hardware
on the drive-side: And this hardware
on the PC-side: For installation,
refer to:
RS-232 Point-to-Point
Serial 1300-ITSSC RS232 port Chapter 3
RS-232 Serial to DH+
Direct Multi-Communications
Adapter Board
(1395-KP51) RS232 port and
1770-KF2 Chapter 4
DH+ Direct Multi-Communications
Adapter Board
(1395-KP51) 1784 -KTx, -KL, or
-PCMK Chapter 4
DH+ to RIO Block
Transfer Pass Thru Node Adapter
(1395-KP50) or
Multi-Communications
Adapter (1395-KP51) 1784-KTx, -KL, or
-PCMK Chapter 5
Ethernet to RIO Block
Transfer Pass Thru Node Adapter
(1395-KP50) or
Multi-Communications
Adapter (1395-KP51) Ethernet Interface
Running TCP/IP Chapter 7
RSLinx Gateway
Server: Ethernet to
DH+ Direct Multi-Communications
Adapter (1395-KP51) Client: Ethernet
Interface Running
TCP/IP
Server: Ethernet
Interface Running
TCP/IP and 1784-KTx,
-KL, or -PCMK Chapter 8
RSLinx Gateway
Server: Ethernet to
DH+ to RIO Block
Transfer Pass Thru Node Adapter
(1395-KP50) or
Multi-Communications
Adapter (1395-KP51) Client: Ethernet
Interface Running
TCP/IP
Server: Ethernet
Interface Running
TCP/IP and 1784-KTx,
-KL, or -PCMK Chapter 8