Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 18)

1-4 Overview
Publication 9303-5.13 – March 1998
Using DriveTools32 with a 1336T (FORCE) Drive
The 1336T (FORCE) drive is a SCANport-compatible product that can use all
options listed above. In addition, it offers the following options:
To use
this communication
type: You need this
hardware
on the drive-side: And this hardware
on the PC-side: For installation,
refer to:
RS-232 Serial to DH+
Direct PLC Communications
Adapter Board
(1336T-GT1EN) RS232 port and
1770-KF2 Chapter 4
DH+ Direct PLC Communications
Adapter Board
(1336T-GT1EN) 1784 -KTx, -KL, -
PCMK Chapter 4
DH+ to RIO Block
Transfer Pass Thru PLC Communications
Adapter Board
(1336T-GT1EN) 1784-KTx, -KL, -PCMK Chapter 5
ControlNet Direct ControlNet Adapter
Board (1336T-GT3EN),
ControlNet Repeater
Adapter (1786-RPA),
and ControlNet Fiber
Module (1786-RPFM) KTC, KTC(X) Chapter 6
Ethernet to RIO Block
Transfer Pass Thru PLC Communications
Board (1336T-GT1EN) Ethernet Interface
Running TCP/IP Chapter 7
RSLinx Gateway
Server: Ethernet to
DH+ Direct PLC Communications
Adapter Board
(1336T-GT1EN) Client: Ethernet
Interface Running
TCP/IP
Server: Ethernet
Interface Running
TCP/IP and 1784-KTx,
-KL, or -PCMK Chapter 8
RSLinx Gateway
Server: Ethernet to
DH+ to RIO Block
Transfer Pass Thru PLC Communications
Adapter Board
(1336T-GT1EN) Client: Ethernet
Interface Running
TCP/IP
Server: Ethernet
Interface Running
TCP/IP and 1784-KTx,
-KL, or -PCMK Chapter 8