Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 48)

4-6 Setting Up DH+ Direct Communications Systems
Publication 9303-5.13 – March 1998
Configuring
RSLinx for DF1
(KF2) to DH+
Communications To use RSLinx for DF1 (KF2) to DH+ communications system, you need to:
1. Configure the communication driver.
2. Test the configured driver.
3. Map the configured driver(s) to the KTPort Value.
Configuring the Communication Driver
To configure the communication driver, you need to:
1. Start the RSLinx application.
2. From the Communications menu, select Configure Drivers. The
Configure Drivers dialog box appears.
3. Double-click RS-232 DF1 Devices. The Configure Allen-Bradley DF1
Communications Device dialog box appears.