Setting the communication information, Setting the communication information -5 – Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED User Manual
Page 77
Setting Up an Allen-Bradley Ethernet to RIO Block Transfer Pass Thru Communications System
7-5
Publication 9303-5.13 – March 1998
2.
From the Communications menu, select SuperWho.
If you have only one configured driver, the communication between the
node(s) on the network should be displayed.
If you have more than one configured driver, double-click on the driver you
just configured to view the communication between the node(s) on the
network.
3.
Close the SuperWho window when you are finished.
Setting the
Communication
Information
You need to provide DriveTools32 with some information that it needs to
establish a connection between your PC and your drive. To do this, you need to:
1.
Start DriverManager32.
2.
From the Options menu, select Communication Setup. The
Communication Setup dialog box appears.
3.
In the Communications section, click A-B Ethernet.
4.
In the Communications Type section, click Ethernet RIO Block
Transfer Pass Thru.
5.
In the Enter IP Address field, enter the same IP address entered in the
Ethernet-to-AB Communications dialog box.