Rockwell Automation 9303 DRIVE TOOLS32 GETTING STARTED - Manual (Page 84)

8-6 Using RSLinx Gateways
Publication 9303-5.13 – March 1998
Connecting to the
Drive To connect to the drive, you need to:
1. From the Drive menu, select Connect to Drive. The Gateway DH+
Network Connect to Drive dialog box appears.
2. In the Enter DH+ Station field, enter the station number.
Valid station numbers are octal values between 0 and 77. If you are using a
1395 drive with a Multi-Comm board or a 1336 FORCE drive with a PLC
Communications Adapter Board, the station number is set on the
communications board.
Important: You can use the WHO button to determine the station number. The
WHO button is covered in further detail below.
3. Click OK.
After a short pause, either the DriveManager32 screen with the drive parameters
appears, or you are prompted to create a database.