Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual - Manual (Page 202)

186 Rockwell Automation Publication 2080-UM002F-EN-E - December 2013
Appendix C Quickstarts
Establish Communications
Between RSLinx and a
Micro830/Micro850
Controller through USB This quick start shows you how to get RSLinx RSWho to communicate with a
Micro830 or Micro850 controller through a USB.
1. RSLinx Classic is installed as part of the Connected Components
Workbench software installation process. The minimum version of
RSLinx Classic with full Micro800 controller support is 2.57, build 15
(released March 2011).
2. Power up the Micro830/Micro850 controller.
3. Plug USB A/B cable directly between your PC and the Micro830/
Micro850 controller.
4. Windows should discover the new hardware. Click No, not this time and
then click Next.