Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual - Manual (Page 213)

Rockwell Automation Publication 2080-UM002F-EN-E - December 2013 197
Quickstarts Appendix C
This quickstart includes the following sections:
•
Create the HSC Project and Variables on page 198
•
Assign Values to the HSC Variables on page 201
•
Assign Variables to the Function Block on page 204
•
Run the High Speed Counter on page 205
•
Use the Programmable Limit Switch (PLS) Function on page 207
Quadrature Encoder
A
B
Input 0
Input 1
Reverse Rotation Forward Rotation
B
A
1 2 3 2 1
Count