Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual User Manual
Page 215
Advertising
Rockwell Automation Publication 2080-UM002F-EN-E - December 2013
199
Quickstarts Appendix C
3.
Right-click UntitledLD and select Open.
4.
From the Toolbox, double-click Direct Contact to add it to the rung or
drag and drop Direct Contact onto the Rung.
5.
Double-click the Direct Contact you have just added to bring up the
Variable Selector dialog. Click I/O Micro830 tab. Assign the Direct
Contact to input 5 by selecting _IO_EM_DI_05. Click OK.
Advertising
This manual is related to the following products: