Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual - Manual (Page 208)

192 Rockwell Automation Publication 2080-UM002F-EN-E - December 2013
Appendix C Quickstarts
10. Click Finish to complete.
If the Micro830/Micro850 still shows up as a 1756 Module, then you are
probably running pre-release firmware which is reporting itself as Major
Revision 0, which does not match the embedded EDS file. To confirm,
right click the device and select Device Properties (firmware Revision is
Major.Minor).
Configure Controller
Password Set, change, and clear the password on a target controller through the Connected
Components Workbench software.