Rockwell Automation 1797-OE8 FLEX Ex Analog Modules User Manual - Manual (Page 56)

Publication 1797-6.5.1 - May 2005
4-8 Input, Output, and Configuration Files for the Analog I/O Modules on the ControlNet Network
Input Data Behavior upon Module Removal
I/O module input data sent by the adapter upon module removal is
configurable. The adapter can:
• reset the module input data sent by the adapter to zero (reset)
• leave the module input data sent by the adapter in the last state before
module removal (hold last state)
Chapter Summary In this chapter you learned about input, output and configuration files for the
analog I/O modules on ControlNet. Move to Chapter 5 to learn how to
calibrate your module.