Rockwell Automation 1797-OE8 FLEX Ex Analog Modules User Manual - Manual (Page 96)

Publication 1797-6.5.1 - May 2005
A-16 Specifications
IMPORTANT
A terminal base may or may not have an I/O module
installed.
1797- IE8 Allen-Bradley
B - A
7 PWR 0 1 2 3 4 5 6
3
8 CHANNEL ANALOG INPUT
FLEX Ex Analog
Output I/O Module
LEDs
Female Bus
Connection
Field Wiring
Terminals
Terminal Base
Terminal Base
Key
Male Bus
Connection
Key Position for
Terminal Base
Insertion
42055
Hazardous (Classified) Location
Class I, Zones 0 Groups IIC, IIB, IIA
Class I, Div. 1 Groups A, B, C, D
Class II, Div. 1 Groups E, F, G
Class III, Div. 1 Hazardous (Classified) Location
Class I, Zones 1 Groups IIC
Class I, Div. 1 Groups A, B, C, D
For connection to other
modules, refer to the
General FM Certification
Information on page 29-1 of
publication 1797-6.5.6.
From FM approved devices,
1797-PS2N.
For connection to other
modules, refer to the General
FM Certification Information on
page 29-1 of publication
1797-6.5.6.
1797-OE8
16
Shield Connection Only
50
51
35
34
V max =5.8V
I max =400mA
C i =1350nF
L i =negligible
V max =9.5V
I max =1A
C i =negligible
L i =negligible
Male Bus
Connector
33
40
41
42
43
44
45
0 (+)
Female Bus
Connector
1 (sig)
ch0
ch1
ch2
ch3
ch4
ch5
ch6
ch7
42056
Any Simple Apparatus or FM
approved device with Entity
Concept parameters (V
max
,
I
max
, C
i
, L
i
) appropriate for
connection to associated
apparatus with Entity Concept
parameters listed in Table 1.
2 (-)
4 (+)
5 (sig)
6 (-)
8 (+)
9 (sig)
10 (-)
12 (+)
13 (sig)
14 (-)
17 (+)
18 (sig)
19 (-)
21 (+)
22 (sig)
23 (-)
25 (+)
26 (sig)
27 (-)
29 (+)
30 (sig)
31 (-)