Rockwell Automation 2706-LV2P_LV2R_LV4P_LV4R DL40 PLUS USER MANUAL - Manual (Page 10)

Using this Manual P–4
Publication 2706-6.1
Regulatory Enhancements
The DL40 Plus meets and is listed for the following environmental,
safety, and European Union regulatory requirements:
•
European Union Directive Compliance – CE marked for: EMC
Directive and LVD Directives. IEC 1131-2 Equipment Class I.
•
UL Listed for Class I, Division 2, Groups A,B,C,D Hazardous
Locations
•
UL Listed for Class I, Zone 2, EX nAIIC and Aex nAIIC
Hazardous Environments
•
cUL Listed for Canadian Safety Standards
Panel Cutout
The DL40 Plus Message Displays fit into the same panel cutout as
the previous DL40, DL20, and DL10 products allowing direct
mechanical replacement for these products.
Offline Programming Software
Use the DL40 Plus Message Display Offline Programming Software
(Catalog No. 2706-LSW) to create, edit, archive and transfer DL40
Plus application files to and from DL40 and DL40 Plus displays.
Application Files
The DL40 Plus displays are 100% backward compatible with
applications developed for previous versions of the DL40 displays.
You can download application files to the DL40 Plus displays using
either the the old or new offline programming software.
You can open a DL20 application file in the DL40 Plus Offline
Programming Software (Catalog No. 2706-LSW) and it will be
automatically converted to a DL40 message file.