Rockwell Automation 2706-LV2P_LV2R_LV4P_LV4R DL40 PLUS USER MANUAL - Manual (Page 72)

Serial Port Communications 6–4
Publication 2706-6.1
You can use the Keyboard port to:
•
control a variety of DL40 Plus functions.
Keystroke Function
[CTRL][T] Triggering messages
[CTRL][V] Inputting variables to fill [CTRL][V] callouts
[CTRL][A] Inputting variables to fill [CTRL][W] callouts
[CTRL][E] Onboard editing
[CTRL][P] Print user application file
[CTRL][S] Historical Events Stack (viewing or printing)
[CTRL][C] Clock setting
[CTRL][D] Debug Mode
[CTRL][R] Set RS–232, RS–485 ports
•
enter ASCII Input [CTRL][X] Data.
Note: ASCII Input data is always returned via the port (RS-485,
RS-232, Remote I/O) that initially triggered the message.
•
dynamically add or delete messages from the list in Message List
Run Mode.
Important: You must set the Keyboard DIP switch on the DL40
Plus to the keyboard in use (XT or AT).
Using the
Keyboard Port