Rockwell Automation 2706-LV2P_LV2R_LV4P_LV4R DL40 PLUS USER MANUAL - Manual (Page 101)

Remote I/O Communications 8–9
Publication 2706-6.1
DL40s with PLC 5/11, -5/15, -5/20, -5/25, -5/30, -5/40, -5/60, or -5/80
PLC-5/11
PLC 5/15
PLC 5/20
PLC 5/25
PLC 5/30
PLC 5/40
PLC 5/60
or
PLC 5/80
These PLCs can
be set up in scan-
ner mode. In this
way, 2706-DL40
Plus displays may
be connected di-
rectly to the pro-
cessor. No exter-
nal scanner is
needed.
DL40 Plus
DL40 Plus
Up to: -12 DL40s and 3 logical racks with a PLC 5/15
-16 DL40s and 7 logical racks with a PLC 5/25
-64 DL40s and 15 logical racks with a PLC 5/40
-64 DL40s and 23 logical racks with a PLC 5/60
Note: The PLC 5/11, -5/15, -5/20, -5/25, -5/30, -5/40, -5/60, and -5/80 have built-in Remote I/O scanners.
Like all scanners, built-in scanners have both physical and logical specifications. See the table on the next page.
Remote I/O
DL40s with PLC 3
PLC 3
Up to 4 channels of 16
DL40s per channel total,
and 32 logical racks.
Scanner Module
1775-S4A,
1775-S4B,
or 1775-S5
DL40 Plus
DL40 Plus
DL40s with PLC 3/10
PLC 3/10
Up to 4 channels of 16
DL40s per channel total,
and 16 logical racks.
Scanner Module
1775-SR
or
1775-SR5
DL40 Plus
DL40 Plus