Rockwell Automation 2706-LV2P_LV2R_LV4P_LV4R DL40 PLUS USER MANUAL - Manual (Page 59)

Offline Operating Modes 4–6
Publication 2706-6.1
Press any key on the keyboard or the [SELECT] or [
↵
] push button
on the front panel to bring up the next message.
Pressing [ESC] or [MSG ACK] returns you to the # OF
OCCURRENCES prompt.
After the last event is displayed, the DL40 Plus will display:
END OF H.E. STACK
PRESS ANY KEY
Print Stack
You can print the Historical Events Stack in either Chronological
order or by the number of occurrences.
From the DL40 Plus Keyboard Port, enter [Y] or [N] followed by [
↵
]
for each prompt. From the front panel, enter [SELECT] or [
↵
] for
each prompt. [SELECT] corresponds to [N] ; [
↵
] corresponds to [Y] .
If you enter [N] to # of Occurrences, the DL40 Plus goes back to the
Print the Stack prompt. Pressing [ESC] or [MSG ACK ] immediately
returns you to the last prompt. If the DL40 Plus is performing the
Print function, that function will be aborted.
When one of the choices is selected, the DL40 Plus will display:
PRINTING H.E. STACK
This will remain on the display until the printing is complete (or
canceled).
Events are printed in the same format as View the Stack .
After the last event is printed, the DL40 Plus will return to the
CHRONOLOGICAL OR # OF OCCURRENCES prompt.
You can create and edit message application files offline using the
Dataliner DL40 Plus Offline Programming Software (Catalog
Number 2706-LSW). You can use its interactive menus on a personal
computer to create messages, set message attributes, and download
to one or more DL40 Plus message displays.
For more information on using the Offline Programming Software,
refer to the Dataliner DL40 Message Display Offline Programming
Software User Manual (Publication 2706-6.2).
Remote Program Mode