Rockwell Automation 2706-LV2P_LV2R_LV4P_LV4R DL40 PLUS USER MANUAL - Manual (Page 50)

Using Special Messages 3–5
Publication 2706-6.1
910 (or 10) Interactive Clock Setting
This message lets you set the clock while the display is in Run mode.
When receiving this message, the DL40 Plus displays the current
time and date, and allows you to use message triggers to change the
current values.
If you trigger Message
Number
The clock will
1 increment 1 second
129 decrement 1 second
2 increment 1 minute
130 decrement 1 minute
4 increment 1 hour
132 decrement 1 hour
8 increment 1 day
136 decrement 1 day
16 increment 1 month
144 decrement 1 month
32 increment 1 year
160 decrement 1 year
64 toggles AM–PM
If triggering a message puts clock/date data out of range, the
message is ignored.
This message is put at the end of the queue and only runs when
previous messages have run.
This message terminates and retains new settings if either:
•
no new setting is received for 20 seconds
•
special message 915 (Stop Special Message/Resume Run Mode)
is triggered.
Message terminates and loses all new settings if either:
•
special message 901, 903, or 904 is triggered
•
Run mode is exited