Rockwell Automation 2706-LV2P_LV2R_LV4P_LV4R DL40 PLUS USER MANUAL - Manual (Page 144)

Installation and Wiring 9–15
Publication 2706-6.1
Before connecting the power cable of the DL40 Plus, make sure the
power source is turned off.
The DL40 Plus requires 100-240 VAC, 50/60 Hz, 0.25 - 0.60 Amps.
!
ATTENTION: Incorrect power wire connection can
cause damage to the DL40 Plus.
Black
(Brown)
White
(Blue)
Green
(Green/Yellow)
L1 L2N
Note: Make sure all DIP switch settings are in the correct position
before the DL40 Plus is powered up. See Chapter 10, DIP Switch
Settings, for the correct DIP switch settings.
AC Power Connector