Connect programming devices in safe areas, Coax cable type – Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual User Manual
Page 25
Advertising
Publication CNET-IN003A-EN-P - January 2006
Plan a ControlNet Ex Media System 2-3
These tap kits are available (dust caps not shown):
Connect Programming
Devices in Safe Areas
Connect programming devices in safe areas to the ControlNet cable
system through a 1784-KTCX15 communication card. Use a
ControlNet tap to connect the communication card to the network.
Figure 2.1 Use a 1784-KTCX15 Communication Card on Coax Media
Coax Cable Type
You must use 1786-RG6, Belden 3092A, or Belden 3092A blue quad-
shield RG-6 coax cable as the ControlNet Ex trunk cable.
Straight T-Tap
Straight Y-Tap
Right-Angle T-tap
Right-Angle Y-Tap
1797-TPS
1797-TPYS
1797-TPR
1797-TPYR
41330
Programming
Terminal
Node
1784-KTCX15
41331
Advertising