Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual - Manual (Page 78)

Publication CNET-IN003A-EN-P - January 2006
B-4 Adjust the Cable Strip Tool
Go to step 5.
4. Align the memory blade cartridge (the side with the raised
notches) to the raised area on the inside of the strip tool and
slide the new memory blade cartridge in
.
5. Swing the memory blade holder closed.
TIP
The blades should be on top as you slide the
cartridge in.
30031-m
Raised Area
Raised Notch
30031a-m
20069-m