Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual - Manual (Page 51)

Publication CNET-IN003A-EN-P - January 2006
Install a ControlNet Ex Media System 3-9
Mount the Fiber Repeater Hub
Follow this procedure to mount the fiber repeater hub.
1. Position the module on a 35 mm x 7.5 mm (1.38 in. x 0.30 in.)
DIN rail (A-B part number 199-DR1) at approximately a 30°
angle.
2. Hook the lip on the rear of the adapter onto the top of the DIN
rail, and rotate the module onto the rail.
3. Press the adapter down onto the DIN rail until flush.
The locking tab should snap into position and lock the module
to the DIN rail.
41167
41166