Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual - Manual (Page 46)

Publication CNET-IN003A-EN-P - January 2006
3-4 Install a ControlNet Ex Media System
Mount a Tap with a Universal Mounting Bracket
1. Align the universal mounting bracket with the mounting holes
on the tap.
2. Use the screws provided with the tap to attach the tap to the
universal mounting bracket.
Universal Mounting Bracket
(Provided With Tap)
Universal Mounting Bracket
Use only the screws that are packaged with the tap. They are the proper length and head style.
Y-Tap
T-Tap
Dust Cap
Dust Cap
20084-M
20080-M
ATTENTION
Do not over-tighten the screws. Over-tightening the
screws can damage the tap. The applied torque
should be 0.2-0.4 Nm (1-2 ft-lbs).
ATTENTION
Do not remove the intrinsically-safe dust cap unless
the tap drop is connected to a ControlNet Ex
product.