Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual - Manual (Page 43)

1 Publication CNET-IN003A-EN-P - January 2006
Chapter
3
Install a ControlNet Ex Media System
What This Chapter Contains Follow the instructions in this chapter to install your ControlNet Ex
media system.
Install the Trunk Cable When installing your trunk cable, observe your cable supplier’s
installation instructions and these guidelines.
Wire External to Enclosures
When the RG-6 type coax cable is being pulled through multiple
conduit bends, follow these specifications.
For See Page
Install the Trunk Cable 3-1
Mount the Taps 3-2
Specifications 3-6
Install Fiber Hubs 3-6
Install Cable Connectors 3-13
Connect Cable Sections 3-25
Terminate Segments 3-25
Connect Devices 3-27
Install the 1797-BCNR Module 3-28
TIP
You should read Chapter 2, Plan a ControlNet Ex
Network, before you install your network.
For This Coax
Cable The Pull Strength Should Not
Exceed The Bend Radius Should Not
Exceed
PVC 42.75 kg (95 lbs) 76.2 mm (3.0 in.)