Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual - Manual (Page 63)

Publication CNET-IN003A-EN-P - January 2006
Install a ControlNet Ex Media System 3-21
2. Place the center pin over the center conductor.
IMPORTANT
Be certain that the center pin slips onto the center
conductor completely. The back shoulder of the
center pin should be up against the white insulation.
If it is not, recheck the length of the center
conductor.
center conductor
center pin
41889
Sometimes strands of insulation are left on the
center conductor. Be certain that the center
conductor is clean before you install the center pin.
Center Pin
Center Conductor