Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual - Manual (Page 64)

Publication CNET-IN003A-EN-P - January 2006
3-22 Install a ControlNet Ex Media System
3. With the center pin in place, use the crimp tool to crimp the pin
into place.
4. Slide the ControlNet connector onto the cable.
41903
The smaller hexagonal crimping notch is
for crimping the center pin onto the
center connector.
Check for braid strands that
could cause a short to center
conductor.
41896
Braid and Tape Shields
Connector Base