Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 117)

Editing Event and Production Data Chapter 8
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 117
An editable row for a new event appears under the row of the
original event, and the event data is displayed in the Event
details panel.
Review the following for additional information.
Item Description
Activity Area
Category - Name
Start Time
End Time
The fields are prepopulated with the selected
event's data. You can modify them to create a new
event.
Reason
Duration The fields are prepopulated with the selected
event's data, and cannot be edited.
Comments The field is optional.
3. Complete or modify the editable fields in the row as needed.
NOTES
Depending on the event configuration in FactoryTalk Metrics, the
fields and buttons in the panel may be enabled or disabled.
For the definitions of the fields, see "Event List Panel (page
105)".
4. Click Save to save the data and create the event.
NOTE
If any required data is missing, the event is not created and an
error message appears describing the cause of the error. You
need to correct your data and save it once again.
To view the event, apply the filtering settings (page 91) that
match its configuration, and click View Data. The event will
be listed in the Event list panel.
You can edit the following event data:
• The category-name (page 118).
• The start and end time (page 119).
• The start and end value (page 121).
You can also edit existing comments that were made to events.
Editing Events