Part description, Partid, Quality – Rockwell Automation FactoryTalk Report Expert User Guide User Manual
Page 173: Realized cycle time, Record state, Reporting value, Running time
Glossary of Fields Chapter 10
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
173
Part Description
The description of the part that was being produced when the event
occurred.
PartId
The ID of the part that was being produced when the event
occurred.
Quality %
The percentage of total parts produced that were of good quality.
The calculation for this field is:
Quality % = GoodParts / Total Parts.
Realized Cycle Time
The actual amount of time it took to produce a part. This value is a
ratio of running time to the total number of parts produced. The
calculation for this field is:
RealizedCycleTime = RunningTime / TotalParts.
Record State
The numeric state of the database record.
Reporting Value
The string value representing the event reason.
Running Time
The number of seconds the machine was in a running state.