Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 121)

Editing Event and Production Data Chapter 8
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 121
NOTES
You cannot change the event time in such a way that it overlaps
with the time of the next or previous event collected with the
same configuration.
If the event occurrence has any records whose end time is earlier
than the modified start time of the event, these records are
deleted.
Similarly, if the event occurrence has any records whose start
time is later than the modified end time of the event, these
records are deleted as well.
If the event is continuous, the end time of the previous event
occurrence and the start time of the next event occurrence are
synchronized with the modified start and end time of the event.
There are several restrictions related to modifying the start/end
values of events. You can change the start/end value provided that
the event configuration fulfills the following conditions:
• It is user defined.
• It is not active (i.e., it is not currently processed by the
FactoryTalk Metrics server).
• Its value type set in FactoryTalk Metrics is one of the
following:
• Collect Value at the Start of the Event.
• Collect Value at the Start and the End of the Event.
• Collect Value at the End of the Event.
• Accumulate Value for the Duration of the Event.
Review the following for additional information.
For this value type of a FactoryTalk
Metrics Event:
You may edit this field:
Collect Value at the Start of the Event Start Value
Collect Value at the End of the Event End Value
Editing the Start/End Value