Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 170)

Chapter 10 Glossary of Fields
170 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
Fault Count
The number of faults that occurred in the reporting period.
Fault Metric Use
Defines how the event affects the calculation of Fault Metrics.
Fault Time
The time when the fault occurred.
Faults
The number of fault states.
Faults per Hour
Faults per Hour = Faults Count ⁄ Uptime
The average amount of faults per hour during the reporting period.
Good Parts
The number of good parts produced.
Ideal Cycle Time
The time required for one part to pass through the work cell under
ideal conditions. Ideal Cycle Time is a real value, represented in
seconds. Usually, the Ideal Cycle Time value changes only if the Part
Id also changes.