Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 90)

Chapter 6 Understanding Parameter Sets
90 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
Use the sorting method to specify the order of the information
within each grouping in a report.
There are two sorting methods:
Item Description
Ascending sorting The information is sorted within each grouping alphabetically, from
A to Z or numerically, from lowest to highest.
Descending sorting The information is sorted within each grouping alphabetically, from
Z to A or numerically, from highest to lowest.
To remove a sorting field and method from the parameter set, click
.
The Plant Model parameter allows you to specify the activity areas of
a plant for which a report will display data. The parameter displays a
plant model defined in the Plant Model dialog box, which you can
access from the Configuration Console in RSBizWare.
By default, none of the check boxes in the plant model is selected.
To associate one or more activity areas with a parameter set, select
the check boxes for those activity areas. For example, if you wanted
to associate the Bend and Cut work cells with a parameter set, you
would select their check boxes as shown below:
Selecting the Sorting Method
Deleting a Sorting
Using the Plant Model
Parameter