Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 131)

Editing Event and Production Data Chapter 8
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 131
The Start Time, End Time, Name, and Number fields
become editable.
NOTE
If a lookup list has been specified during work cell
configuration, the Number field is read-only and cannot be
edited.
3. Modify the desired fields.
4. Click Save to save the modified data.
To split a shift instance:
1. Select the Edit Shift Information operation and the desired
parameter set, and then click View Data.
The data is displayed.
NOTE
Depending on the selection criteria you have used to display
the data, some of the shift instances in the list can actually
be off-shift instances, which are distinguished by the
negative value in the Number field.
2. Click Split in the row with the shift instance that you want to
split.
The selected shift instance is split into two instances.
3. Review the following for additional information.
Item Description
Activity Area The field cannot be edited.
Start Time The field cannot be edited.
The start time value in the lower row will be automatically
set to the end time value entered for the upper row once
you save the modified data.
End Time The field can be edited in the upper row.
The value entered in the upper row will automatically
become the start value of the lower row once you save the
modified data.
Name The field can be edited in both rows.
Number The field can be edited in both rows.
4. Complete or modify the editable fields as needed.
Splitting Shift Instances