Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 63)

Understanding Report Templates Chapter 5
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 63
• OEE % = Uptime x Throughput x Quality
• DownTime = AvailableTime - RunningTime
• IdealParts = AvailableTime / IdealCycleTime
• TEEP = (Good Parts * Ideal Cycle Time)/Total Time
• TEEP = OEE*(Available Time/Total Time)
The Quality report template allows you to assess the quality of the
parts that have been produced.
Query: Performance
The fields of the report template grid:
Item Description
Good Parts The number of good parts produced.
Scrap Parts The number of parts rejected due to poor quality.
Quality % The percentage of total parts produced that were of good quality.
The calculation for this field is:
Quality % = GoodParts / Total Parts.
The values of the report template and other report templates to
which the values link using the drillthrough hierarchy:
Click a value in this column: To display this report template:
Good Parts Quality (grouped by the next value in the
drillthrough hierarchy)
Scrap Parts
Quality %
The report template bar charts: Quality %.
Quality