Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 154)

Chapter 9 Administering Report Expert
154 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
To delete an existing report subscription, on the Subscriptions
tab:
1. In the Edit Command column for the subscription you want
to delete, click the Delete link.
2. Confirm the deletion in the message box that appears. This
action cannot be undone.
3. Click Save.
NOTE
If you close your browser before clicking Save, your changes will
be lost.
Use the Parameter Sets tab to add, modify, and delete the
parameter sets that serve as the filtering criteria required to execute
Report Expert reports.
To open the tab, click on the
Administration page.
NOTE
The name of each parameter set must be unique. When you add, modify
or copy a parameter set, the name you specify must not be identical to
the name of any parameter set that already exists. If it is identical, you
will be prompted with an error message Parameter set name not
unique.
To add a new parameter set:
1. Click New.
2. In the Parameter Set Name text box, type a name for the
parameter set.
Deleting Report
Subscriptions
Configuring Parameter Sets
Adding Parameter Sets