Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 65)

Understanding Report Templates Chapter 5
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 65
NOTE
If the data returned exceeds the maximum number of rows allowed in
the resulting report, the Max row limit reached message appears in
red above the grid. The maximum row number can be changed in the
RptSettings table. For details, see "Modifying the RptSetting Table (page
143)".
The report template has one hard-coded grouping with one page
group (line) and four row groups (Work cell, Shift Start, State, and
PartId).
The report template has six control buttons. Each adjusts the
parameter set time window of the state data displayed:
Item Description
<< Scroll left 1 Decreases the parameter set time start and end by the difference
between end and start.
< Scroll left 1/4 Decreases the parameter set time start and end by 1/4 the
difference between end and start.
>> Scroll right 1 Increases the parameter set time start and end by the difference
between end and start.
> Scroll right 1/4 Increases the parameter set time start and end by 1/4 the
difference between end and start.
Zoom In Zooms in 50%. Increases the parameter set time start and
decreases the parameter set time end by 1/4 the difference
between end and start.
Zoom Out Zooms out 2X. Decreases the parameter set time start and increases
the parameter set time end by 1/2 the difference between end and
start.
The drillthrough hierarchy: none.
Calculations used by Report Expert to obtain values in the resulting
report:
• Duration = End Time - Start Time
State Detail