Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 99)

Viewing and Generating Reports Chapter 7
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 99
4. Click the View Report link. The resulting report appears in
the display area.
When you generate a report using customized parameter set
settings, the parameter set used in the report is defined as
Cache from URL.
5. If you are an administrator, you can make the changes to the
parameter set permanent. To do this, click Save.
To create a new parameter set:
1. Click New.
2. Under Edit Parameter Set Name, type a name for the new
parameter set.
3. Select the desired parameters.
TIP
See "Understanding Parameter Sets (page 77)" for details.
4. Click Save.
NOTE
Administrators can create new parameter sets on the Administration
page. See "Configuring Parameter Sets (page 154)" for details.
The display area, in which reports are presented, contains a set of
tools that you can use to:
• Navigate a report (page 100).
• Export a report (page 100).
• Print a report (page 101).
Creating New Parameter Sets
for Reports
Viewing and Using Reports