Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 126)

Chapter 8 Editing Event and Production Data
126 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014
3. Click Edit in the row in which you want to modify the
number of good and scrap parts.
The Good Parts and Scrap Parts fields become editable.
4. Complete or modify the Good Parts and Scrap Parts fields.
5. Click Save to save the modified data.
There are restrictions related to editing the ID of the produced
parts. You can change the part ID provided that the activity area
configuration fulfills the following conditions:
• Part Id Type is set to the following:
• Use a single Part Id.
• Monitor an Unscheduled data point for Part Id.
To edit the ID of the produced part:
1. Select the Edit Production Data operation and the desired
parameter set, and then click View Data.
TIP
Alternatively, select the Enter Data Manually operation and
the desired parameter set, and then click View Data. Make sure
that the Production option is selected.
The data is displayed in the Production data list panel.
2. Click Edit in the row in which you want to modify the ID of
the part.
The Part Id field becomes editable.
3. Complete or modify the Part Id field.
4. Click Save to save the modified data.
Editing the Part Id