Rockwell Automation DeviceLogix System User Manual - Manual (Page 112)

112 Publication RA-UM003B-EN-P - February 2010
Chapter 4 Navigate the Old Ladder Editor Interface
File Menu
The File menu lets you perform printing functions and lets you exit
the old DeviceLogix Ladder Editor.
Edit Menu
The Edit menu lets you modify elements in the old Ladder Editor.
File Menu
Function Description
Print Sends the ladder logic to a printer.
Print Preview View the ladder logic before sending the logic to the printer.
Print Setup Choose printer and printing options.
Close Exit the old DeviceLogix Ladder Editor.
Edit Menu
Function Description
Undo Cancels the last action.
Redo Performs again the previously cancelled action.
Cut Removes the selected ladder element.
Copy Duplicates the selected content to save it in the clipboard.
Paste Places the content in the clipboard into the old Ladder Editor
at the position that your cursor is resting.
Select All Highlights all of the elements in the old Ladder Editor (to
copy or cut). This menu option has different behavior
depending upon the current selection in the old Ladder
Editor:
• When a rung is selected, Select All selects all of the
rungs.
• When a branch leg is selected, Select All selects the
entire branch.
• When a branch level is selected, Select All selects the
entire branch level.
Add Ladder Element Insert a ladder element at the place where the cursor is
positioned. The Add Ladder Element window opens for you
to select the type of element you wish to insert.
Delete Ladder Element Removes the selected element from the old Ladder Editor.
Edit Ladder Element Modifies the selected ladder element by you changing the
instruction type or the instruction type parameters. Note
that it is possible to change only instruction types of the
same category (bits, latch, timers, counters).