Rockwell Automation DeviceLogix System User Manual - Manual (Page 137)

Publication RA-UM003B-EN-P - February 2010 137
Navigate the New Ladder Editor Interface Chapter 6
File Menu
The File menu lets you perform printing functions and lets you exit
the new Ladder Editor.
Because the new Ladder Editor is not a standalone application but
rather is part of the host software, this File menu does not provide
options for creating, opening, or saving new ladder logic
configurations.
Edit Menu
The Edit menu lets you modify elements in the new Ladder Editor.
Function Description
Print Sends the ladder logic to a printer.
Print Preview Displays the ladder logic before sending the logic to the
printer.
Print Setup Allows you to choose printer and printing options.
Close Exits the new Ladder Editor.
Function Description
Undo Cancels the last action.
Redo Performs again the previously cancelled action.
Cut Removes the selected ladder element.
Copy Duplicates the selected content to save it in the clipboard.
Paste Places the content in the clipboard into the Ladder Editor at
the position that your cursor is resting.
Select All Highlights all of the elements in the Ladder Editor (to copy or
cut). This menu option has different behavior depending
upon the current selection in the Ladder Editor:
• When a rung is selected, Select All selects all of the
rungs.
• When a branch leg is selected, Select All selects the
entire branch.
• When a branch level is selected, Select All selects the
entire branch level.
Add Ladder Element Insert a ladder element at the place where the cursor is
positioned. The Add Ladder Element window opens for you
to select the type of element you wish to insert.
Delete Ladder Element Removes the selected element from the Ladder Editor.