Rockwell Automation DeviceLogix System User Manual - Manual (Page 148)

148 Publication RA-UM003B-EN-P - February 2010
Chapter 7 Create Logic in the New Ladder Editor
Create the Macro Definition
Complete these steps to create a new Macro definition.
1. Choose Tools > Macro > Create Macro Block.
The Macro Block Definition dialog box appears, containing
General, I/O, Parameter and Security tabs.
2. On the General tab, assign a unique and valid Name for the
Macro block.
Valid names are alpha-numeric and are limited to 16 characters.
3. Enter a Description.